VigorLift 60828HD Rear Air Springs Kit -7X 60828HD 2019-2023 Dodge Ram 1500 and Ram 1500 Pickups

I've just finished installing these airbags myself, and I'll update once I've had a chance to test them out with my camper. However, I must say, the installation process was far more challenging than I anticipated, contrary to what I gathered from previous comments. I opted not to remove the springs, despite many recommendations to do so. Here's a tip: hold off on cutting the zip ties securing the bags inside the coil until after you've attached the air line to the Schrader Valve on top. Dealing with the round spacer insert made accessing the short Schrader valve quite the feat, but with some effort, I managed to get it attached. Fortunately, the second bag went much smoother!

This product is a game-changer! Installing it was a breeze. Simply engage the 4-wheel drive and set the parking brake, then chalk the tires to keep them in place. Next, position the left rear of your truck at the hitch until the tires are nearly off the ground. For added safety, slide a jack stand under the hitch. Now, lift the tire with a second jack, just enough to remove the wheel. To install the airbag, compress it and thread it through the spring. I found using a single zip tie helpful for securing the bottom as I guided it through. Make sure to pull the bottom of the bag down into the spring while pushing the top in—it makes the process much smoother. I ran the valve stem through the bottom plate hole and had to drill a 1” hole in the double-walled plastic to accommodate the nut and lock washer. Afterward, inflate the bags, and voila! I opted for 15 psi and am amazed by the difference in ride quality—it's like driving my diesel Titan HD! Say goodbye to bounce and body roll—this upgrade will undoubtedly enhance towing control significantly!